75
System manual
VAIE 4000 Compact Systems
EN
VAIE
4000
set> SD CARD MENU
Setting of emergency messages
The standard alert and evacuation messages and the broadcast warning signal
(chime) are stored at the factory on the SD card mounted on the CPU circuit.
In order to customise the system, it is possible, however, to add to and/or up-
date these files. To do so, it is necessary to:
-
Place the main thermal-magnetic circuit breaker upstream from the system
in the OFF position: the
VAIE
enters the stand-by mode, exploiting the
power supply from the batteries.
-
Open the front door of the VAIE by unscrewing the two fixing screws.
-
On the display, press the
Turn SD card off
key: the red LED associated
with the card extinguishes. At this point it is possible to extract the SD
from the
VAIE
.
-
Programme the card with the new audio files (max. 20).
Following are the requisites of the files, which have to be copied into the
root directory of the SD card:
• Format: *.WAV
• Resolution: 16 bit / mono
• Sampling frequency: 48 kHz
• Filename: max 8 char .wav extension).
-
Once the files have been copied onto the SD card, fit it back onto the CPU
circuit and, on the display, press the
Turn SD card on
key: Check that the
red LED lights up again.
-
Close the front door of the
VAIE
, tightening the screws firmly back into
place.
-
Return the main thermal-magnetic circuit breaker to its ON position.
The SD card is now mounted correctly and the menu on the display shows a list
up-dated with the new audio files, which can be browsed using the Up/Dn keys.
To set the new EVACUATION message (EVAC):
Select the desired file and press the
Set evac
key.
To set the new ALERT message:
Select the desired file and press the
Set alert
key.
To set the new BROADCAST WARNING SIGNAL (CHIME):
Select the desired file and press the
Set chime
key.
The names of the files set appear as a reminder at the bottom of the screen,
together with the type of use.
The SD card menu screen also shows three other function keys:
-
Press the
Save log file
key to save fault and alarm events file on the SD
card (file name: EVENT1.LOG).
-
Press the
Store conf. on SD
key to save the system configuration settings
on the SD card.
-
Press the
Load conf. from SD
key to load the previously saved system
configuration settings from the SD card.
To return to the SD card menu screen, press
Escape
once.
To return to the CONFIGURATION menu press
Escape
twice.
Message selection
Escape
Dn
Up
Set evac
Set alert
Set chime
MSG.WAV
ALERT.WAV
EVAC.WAV
Evac file = EVAC.WAV - 995 kB - cks 43339
Alert file = ALERT.WAV - 1029 kB - cks 58701
Chime file = CHIME.WAV - 287 kB - cks 26682
Message selection
NOTE:
Within the SD card menu, the message playback functions are inhibited; this status is signalled by the fixed lighting
of the yellow DIS LED. In order to reactivate the message playback function (DIS led off) it is necessary to exit the
SD card menu by pressing Escape.
