LCD Keypad Layout (cont’d)
– 6 –
1 – DISPLAY AREA
Two line by sixteen-character liquid crystal display. This area
contains the current system status using easy to read English
language descriptions programmed by your installer.
2 – ARM/DISARM INDICATOR
This light indicates whether the system is currently armed (activated)
or disarmed (deactivated). In addition to this constant visual
indication, the display area will provide additional information
concerning the current system status. This indicator will blink when
an alarm has occurred.
3 – STAY
The STAY key is used to activate (arm) the system with the exception
of interior protection. This will provide exterior protection of your
location while allowing full access through the premise. This mode
would be used when arming the system and you might be walking
through protected interior zones.
4 – BYPASS
The BYPASS key will be used to temporarily turn off protection to a
portion of your Security System. This could be performed, for example,
to ignore an open window that would prevent the arming of your
system. Certain zones such as FIRE detection zones are always active
and cannot be bypassed.
5 – INSTANT
The INSTANT key is used to activate (arm) the system and eliminates
the entry time delay. This would cause an immediate alarm if
someone came through an exit/entry zone.
6 – CODE
Function key used when entering or changing the User access codes of
your Security System.
