System Testing (cont’d)
– 49 –
Battery Test
In order to test the backup battery the following procedure should be
performed:
1. Remove the AC transformer from the AC outlet by removing the
retaining screw that secures the transformer to the wall. (Note: the
screw is not present in models sold in Canada).
2. Observe that the AC light goes off on the keypad.
3. Activate your alarm system using steps 1-4 listed above.
4. Replace the AC transformer to the AC outlet and secure using the
retaining screw (Note: The retaining screw is not present in
models sold in Canada).
The National Fire Protection Association publishes a standard for
household fire warning equipment (NFPA #74). Further information
can be obtained by contacting; NFPA Public Affairs Dept.,
Batterymarch Park, Quincy, MA 02269.
If you have any further questions about the operation of your system,
call your installer.
