Quick Commands (cont’d)
– 35 –
ENTER Part (0 - 9)
# View,
✴
Exit
Next enter the partition that you wish to operate. Entry of 1 - 8 will
return with the keypad displaying the status of the requested
partition. At this point you can perform any of the regular keypad
functions, within your authorization level, for the requested partition.
In addition to the normal partition requests (1 - 8) the following
special functions are available:
Arm All Partitions (0)
To arm all of the partitions that you are authorized enter a 0 into the
partition request. This function will arm all of the partitions in the
AWAY mode from the single keypad. A message "ALL SYSTEMS
ARMED AND SECURED" will appear to confirm the arming. If any of
the partitions are NOT READY, then the partitions that are NOT
READY will display one at a time on the keypad. Upon viewing the
partitions, which are not ready, you may take the appropriate action
to make the zones ready (or force arm the partition).
View Mode (#)
The View mode allows an authorized user to view the armed status of
all partitions through the keypad. Simply enter a # from the partition
selection display and the keypad will display the armed status for all
active partitions that the user has been authorized. A typical LCD
keypad display may appear as:
SYSTEM STATUS
ARMED 12 8
On LED keypads, the partitions that are disarmed illuminate LEDs 9-
16 and partitions that are armed illuminate LEDs 1-8. The Bat, Stay,
Rdy, Com, and Ins LEDs perform their normal function.
