– 26 –
User Code Definition
User codes are required to operate your Security System. Users can be
entered or modified directly through the keypad. The Security System
contains up to 64 (XL-4) or 128 (XL-5) separate user codes. Authorized
users can modify user codes directly through the keypad. Each of the
User codes have the following characteristics:
USER ID- This is the code entered at the keypad to operate the
Security System. Each separate user must be assigned a unique user
code. The user ID has been displayed as [USER] throughout this
manual.
USER NUMBER- Sequence number identifying the user being
modified or entered. The user numbers range from 001 to 064 (XL-4)
or from 001 to 128 (XL-5).
AUTHORIZATION LEVEL- The control panel contains
authorization levels to control the users permitted to perform various
system functions. This allows users to be restricted to certain
functions. The levels are shown below:
LEVEL 1 - ARM, DISARM, BYPASS, PROGRAM USERS,
CHANGE PARTITION ASSIGNMENTS IN ALL PARTITIONS
This would be the highest level user and would be able to perform
all functions within all partitions (subsystems).
☞
User Code 1 should always be set to a Level 1.
LEVEL 2 - ARM, DISARM, BYPASS, PROGRAM USERS,
CHANGE PARTITION ASSIGNMENTS IN OWN PARTITION
This level of user would be able to perform all functions and would
be able to change user partition access only within the partitions
(subsystems) where the user is assigned.
LEVEL 3 - ARM, DISARM, BYPASS, PROGRAM USERS
LEVEL 4 - ARM, DISARM, BYPASS
LEVEL 5 - ARM, DISARM
