– 13 –
Arming The System
ARMING the system will activate all portions of your Security
System. Arming can only be performed if all zones are READY. For
example, if a protected door is open the system cannot be armed.
☞
Note: Your installer can program your system to be armed if
certain zones are not ready. Contact your installer to determine
whether this applies to your system.
System Ready
Ready Indications
LCD Based Keypads
If the system is ready to be armed the following message will appear
in the display area of the LCD keypad:
SYSTEM READY
The second line of the display can display a system wide descriptor
(example SMITH RESIDENCE) and may scroll through other system
conditions that are present.
LED Based Keypads
On LED keypads the READY indicator must be ON.
Arming Procedure
Enter your user code into the keypad:
[USER]
On LCD keypads the following display appears:
ON:AWAY ……
... Exit Now .....
The ARMED indicator light will now be lit (LED and LCD keypads)
and you may exit through a door designated by your installer as an
exit/entry zone for a fixed time period known as the exit delay. Once
the exit time period has expired the EXIT NOW indication will
disappear.
Your exit time is _______
Your entry time is _______
