- 19 -
Miscellaneous Commands
(cont)
1. Enter 0 (Adjust down - Clock fast) or 1 (Adjust up - Clock slow). The
adjustment value prompt is displayed.
2. Determine how far off the clock is (in seconds) from the correct time.
3. Determine the number of days since the last time the clock was set.
4. Divide the number of seconds that the clock is off by the number of days
since the last time the clock was set.
5. Enter the result of step 4 as the adjust value. Valid entries are 00 for no
change, 1–29 for seconds to add (per day), or 1–30 for seconds to subtract
(per day). If the value entered is valid, an acknowledgement is sounded. If
the value entered is not within the valid range, an error is sounded.
DISPLAY ZONE DIRECTORY (LCD KEYPADS ONLY)
To view a list of the zones in the current partition, press
#
+
4
. The zones
will automatically scroll.
USER LOG VIEW (LCD KEYPADS ONLY)
To view the system log, press:
#
+
5
, +
3
+ user code.*
(*The user code is not required if so programmed by installer.)
When the command is accepted, the display will show the most recent event.
Pressing either
STAY
or
✱
exits this mode. Pressing any other key
advances to the next valid log entry.
KEY FOB LOW-BATTERY TEST
To activate the key fob low-battery test:
Press :
#
then
5
+
6
The test mode is indicated as follows:
LCD Keypad:
Keyfob Bat. Test
#56
✱
=Exit
Fixed-Word Keypad:
AC
FO TEST
LED Keypad:
An acknowledgement
tone is sounded.
When a keyfob button is pressed, the system will provide a display indicating if
the keyfob has a low-battery condition.
The system exits this mode when the star [
✱
] key is pressed.
