- 11 -
Arming the System
(cont)
TO ARM THE SYSTEM IN INSTANT MODE AND STAY INSIDE
In INSTANT STAY mode, the perimeter portion of your burglar alarm system is
armed, but the time delays are eliminated from your normal entry/exit door(s). All
interior protection is disarmed, so you are free to move around inside.
Check to make sure the system is READY. When it is ready, press:
INSTANT
followed by
STAY
followed by your user code.
When the system has been armed successfully, the ARM light, the INSTANT light,
and the STAY light are all lit, and the following is displayed:
LCD Keypad:
ON: STAY / INS
PART 1
Fixed-Word Keypad:
STAY
INSTANT
LED Keypad:
ARM, STAY, and
INSTANT LEDs lit
TO ARM THE SYSTEM IN INSTANT MODE
In INSTANT mode, all alarm sensors, including doors that normally have a
delay to allow you to disarm the system, will report an alarm immediately if
activated. Check to make sure the system is ready. When it is ready, press:
INSTANT
followed by your user code.
When the system has been armed successfully, the ARM light and the
INSTANT light are lit, and the following is displayed:
LCD Keypad:
ON: INSTANT
PART 1
Fixed-Word Keypad:
INSTANT
LED Keypad:
ARM and INSTANT LED
lit
