- 17 -
Miscellaneous Commands
(cont)
TURN CHIME ON/OFF
Chime is an optional feature that causes the keypad to beep when selected
doors are opened while the burglary protection is off or disarmed.
Only your installer can program a zone for the Chime feature, but once
programmed, you can turn Chime on or off to meet your daily needs.
To turn Chime on or off: Press
#
, then
6
.
ASSIGN USERS ACCESS TO OTHER PARTITIONS
You can assign users access to any of the partitions in a multi-partition system
by entering the following:
#
7
[master code] [user number] [1, 2, 3*]
where 1, 2, 3* are the partitions to which the user is authorized to access.
* Partition 3 is not available on the OMNI-624 and OMNI-624EU. Partition 3
is available on the OMNI-848 and OMNI-848EU ONLY.
CHANGE PARTITION
To arm or disarm other partitions from your keypad, enter the following:
#
0
[1-3, 0, 9]
where: 1-3* = the desired partition you wish to change to
When you enter a partition number (1-3*), the system displays
the current armed state for that partition. You can then arm
or disarm the partition by entering the arming/disarming
command.
0
=
arms
all
partitions
9
=
disarms
all
partitions
* Partition 3 is not available on the OMNI-624 and OMNI-624EU. Partition 3
is available on the OMNI-848 and OMNI-848EU ONLY.
SET AUTO-ARM TIME
Set Auto-Arm Time lets you set the time your system will automatically arm.
To set the Auto On Time:
Press
#
, then
5
, +
4
+ user code + hour 00-23 + minute 00-59.
The keypad will prompt you for the required entries.
