- 18 -
Miscellaneous Commands (cont)
TO VIEW AUTOARM TIME
To view the autoarm time for the partition to which the keypad is assigned,
press:
#
, +
5
, +
2
+ user code with authority level 1 or 2.
AUTOARM TIME:
05:00PM
(The user code is not required if so programmed by installer.)
DOOR STRIKE
To activate door strikes:
Press
#
+
5
+
7
+ Door No.
If programmed, certain user codes can also be used to open a door. See your
installer for door numbers.
VIEW QUICK COMMAND LIST (LCD Keypads Only)
To view a display of available quick commands, press:
#
+
5
+
0
.
To step through the available quick commands, press # .
To exit the quick command list, press
✳
.
VIEW TIME (LCD KEYPADS ONLY)
To view the system time, press:
#
+
5
+
1
. A typical display is as follows:
Jan 27, 2001
08:15A
SET TIME
To set the time, press:
#
+
3
, + user code (not required if so programmed
by installer), then follow the prompts (on LCD keypads only) and enter the
hour, minute, month, day, and year. All entries are 2-digit entries.
Additionally, if your system installer has set your system to use an internal
crystal real-time clock, you will be promted to enter a crystal adjustment. If
your clock has been keeping the proper time, respond to the crystal adjustment
prompt by pressing
1
followed by
0 0
when the system prompts you for
an adjustment value. If the clock has not been keeping time correctly, when the
crystal adjustment prompt is displayed, proceed as follows:
