Fayat BOMAG BW 120 AD-5, Operating Instruction

Page: 44 / 210

3.7 Driving the machine; working operation
3.7.1 Driving the machine
Always wear the seat belt when driving.
Only drive on load-bearing surfaces.
Do not drive on ice and snow.
If the machine has touched high-voltage power
lines:
n
do not leave the driver’s stand,
n
warn others from coming close to or
touching the machine,
n
if possible, drive the machine out of the
danger zone,
n
have the power switched off.
Operate the machine only from the driver’s
stand.
Do not adjust the driver’s seat while driving.
Do not climb onto or off the machine while the
machine is driving.
Do not use the machine to transport persons.
In the case of unusual noises and appearance
of smoke, perform troubleshooting to determine
the cause and have the fault corrected.
Match the speed to the working conditions.
Do not make extreme steering movements
when driving with high speed, danger of tipping
over!
Always give way to loaded transport vehicles.
Switch the lights on if visibility is poor.
Always keep a safe distance to excavation pit
borders, embankments and edges.
Refrain from any work that could adversely
affect the stability of the machine.
Concerning your safety – Driving the machine; working operation
BW 120 AD-5 44