Fayat Group DYNAPAC DRP70D, Operating Instruction

Page: 85 / 112

12. Fill the fuel tank.
13. Bleed the fuel system before starting
Ä
Chapter 8.2.2
„Bleeding the fuel system“ on page 66 .
14. After a short test run check fuel filter and fuel lines for leaks.
15. Dispose of fuel and fuel filter in an environmentally friendly
way.
8.9.5 Replacing the air filter
NOTICE!
Danger of engine damage!
– Do not start the engine after having removed
the air filter.
Protective equipment: n Working clothes
n
Protective gloves
1.
Park the machine in secured condition
Ä
Chapter 6.4
„Parking the machine in secured condition“ on page 57 .
2. Allow the engine to cool down.
3. Remove the cap (1).
4. Pull out the air filter.
5. Clean the cover.
6.
NOTICE!
Danger of engine damage!
– Prevent dirt from getting into the air
intake opening.
– Do not clean the air filter housing with
compressed air.
Clean the filter housing with a clean, lint-free cloth.
7. Replace the air filter.
8. Slide the air filter (2 ) carefully into the filter housing.
9. Check the sealing face (3) on the cover.
10.
NOTICE!
Danger of engine damage!
– Ensure correct fit of cover and seal.
Close the cap (1).
Fig. 82
Fig. 83
Maintenance – Annually / every 250 operating hours
DRP70D 85