Fayat Group DYNAPAC DRP70D, Operating Instruction

Page: 96 / 112

2. Turn the outer V-belt pulley with the suitable tool, until the
required belt tension is achieved.
Counter the inner V-belt pulley with a suitable
tool.
3. Retighten the threaded pins, tightening torque: 10 Nm
(7.4 ft
·
lbf).
1. Fasten the V-belt guard (1).
8.11.4 Checking the oil level in the exciter housing
NOTICE!
Components may get damaged!
– Use only oil of the permitted specification
Ä Chapter 8.4 „List of fuels and lubri-
cants“ on page 71 .
– Do not use low-ash engine oils for the exciter
shaft housing.
Protective equipment: n Working clothes
n Safety shoes
n Protective gloves
1. Park the machine on level ground.
2. Park the machine safely
Ä
Chapter 6.4 „Parking the machine
in secured condition“ on page 57 .
3. Allow the machine to cool down.
Fig. 109
Concluding work
Fig. 110
Maintenance – As required
DRP70D 96