Fayat Group DYNAPAC DRP70D, Operating Instruction

Page: 84 / 112

13. Fill in fresh engine oil through the filler opening.
14. Push the dipstick in.
15. After a short test run, check the oil level on the dipstick, top
up oil if necessary.
16. Check oil filter and drain plug for leaks.
17. Dispose of oil and oil filter insert in an environmentally
friendly way.
8.9.4 Replacing the fuel filter
NOTICE!
Danger of engine damage!
– Ensure strict cleanliness! Thoroughly clean the
area around the fuel tank beforehand.
– Never operate the engine after having removed
the fuel filter.
Protective equipment: n Working clothes
n Protective gloves
1. Park the machine in secured condition
Ä
Chapter 6.4
„Parking the machine in secured condition“ on page 57 .
2. Use a suitable vessel to collect running out fuel.
3. Drain the fuel.
4. Clean the area around the fuel filter.
5. Unscrew the hose clamp from the holding fixtures.
6. Pull the fuel filter with the fuel lines out of the hose clamps.
7. Pull the fuel lines off the fuel filter.
8. Replace the fuel filter.
9. Plug on the fuel lines.
Observe the flow direction of the new fuel
filter.
10. Insert the fuel filter with the fuel lines into the hose clamps.
11. Screw the hose clamps to the holding fixtures.
Filling in engine oil
Fig. 80
Concluding work
Fig. 81
Maintenance – Annually / every 250 operating hours
DRP70D 84