Fayat Group DYNAPAC CC1300C Instruction Manual Download Page 125

Page: 125 / 134

Maintenance - 2000h

4812162101_D.pdf

2021-12-14

Controls - Lubrication

Fig. Forward/Reverse lever
1. Plate
2. Attachment screws

Lubricate the forward/reverse lever mechanism.

Remove the cover/plate (1) by loosening the screws
(2) on the top, and lubricate the mechanism under the
cover/plate with oil.

Check - Coolant system

Figure. Cooling water container
1. Filler cap
2. Level marking

Check that all hoses/hose connectors are intact and
tight. Fill with coolant as specified in the lubricants
specification.

Take great care when opening the radiator cap
while the engine is hot. Wear protective gloves and
goggles.

Also check the freezing point. Change the coolant
every other year.

115

Summary of Contents for DYNAPAC CC1300C







































































































































Search results

Summary of Contents for DYNAPAC CC1300C

Reviews:

Related manuals for DYNAPAC CC1300C

Brands by name

Popular brands

Fayat Group DYNAPAC CC1300C, Instruction Manual

Search results

Summary of Contents for DYNAPAC CC1300C

Reviews:

Related manuals for DYNAPAC CC1300C

Brands by name

Popular brands