Fayat Group DYNAPAC CC1300C, Instruction Manual

Page: 70 / 134

Miscellaneous
4812162101_D.pdf 2021-12-14
1
2
3
4
Fig. ROPS locking device
1. Tensioning screw
2. Pin
3. Stud
4. Rubber buffer
To retract the ROPS, release the tensioning screw (1),
and pull out the pin (2) and stud (3). Do the same on
both sides. Lower the ROPS backwards if there is
space.
Remember to dismantle the rotating warning light
before lowering the ROPS. Remember to dismantle the rotating warning light
before lowering the ROPS.
After lowering the ROPS, replace the pin and stud. After lowering the ROPS, replace the pin and stud.
To lift the ROPS proceed in the reserve order.
Always make sure the ROPS is locked in raised
position before operation. Always make sure the ROPS is locked in raised
position before operation.
Grease the tensioning screw (1) and stud (3)
periodically.
60