Subject to change without notification
Subject to change without notification
2
Versatility
Multiple voltage-controlled inputs to adjust speed, acceleration ramps and output voltage.
Pulse input, permitting use as a stepper motor or alternatively as a rated-speed motor.
Pointer instrument input, with which the rotor can be deflected from the zero-position
in proportion to an applied analog voltage.
Serial link (RS232, RS422), enabling all parameters to be adjusted from a PLC or a PC.
Features:
Small footprint: 42 x 24 mm
Enormous speed range, from 21 rpm to 120 000 rpm with fine resolution
Powerful: 200 mA running current
Selectable common-bus or individual supply for electronics and motor
Non-volatile memory: all parameters such as speed, drive mode, target position etc.
can be stored as required and are immediately available again after power-on.
The processing performance is achieved by using a powerful 24 MHz microcontroller.
In order to put the MCBL 05002 into service quickly and without problems, a Starter Kit
MCBL 07002 is available for the laboratory. This is described in Chapter
5.5
.
Fig. 2: Schematic diagram of MCBL 05002
