User Manual
DIC324
3.3.4
4
4.1
4.2
4.3
ANNEX A DISCLAIMER
………………………………………………………………………………………………………………..44
LIST OF TABLES
Table 1-1: Ordering information
……………………………………………………………………….………………........................11
Table 1-
2: Delivery checklist……………………………………………………………………………………………………………..12
Table 1-3: Additional
accessories……………………………………………………………………………………………………….12
Table 2-1: Identification of ISA bus contacts, row A
…………………………………………………………………………………..17
Table 2-2: Identification of ISA bus contacts, row B
…………………………………………………………………………………..18
Table 2.3: XP10 connector contacts
……………………………………………………………………………………………………19
Table 2-4: Table of XP11 connector contacts
………………………………………………………………………………………….23
Table 3-1: SA1 switch setting
……………………………………………………………………………………………………………29
Table 3-2: Type of inputs
…………………………………………………………………………………………………………………31
Table 3-3: Trigger threshold per each group of eight input channels
……………………………………………………………….32
Table 3-4: Setting the load type connection
……………………………………………………………………………………………33
Table 3-5: Control register
……………………………………………………………………………………………………………….35
Table 3-6: Event front edge codes for groups of inputs
………………………………………………………………………………36
Table 3-7: De-bouncing time codes for groups of inputs
……………………………………………………………………………..36
Table 3-8: Control register
……………………………………………………………………………………………………………….36
Table 3-9: Register of interrupts
…………………………………………………………………………………………………………36
Table 3-10: Register of inputs
……………………………………………………………………………………………………………37
Table 3-11: Register of events
…………………………………………………………………………………………………………..37
Table 3-12: Control register
……………………………………………………………………………………………………………...38
Table 3-13: Register of data
……………………………………………………………………………………………………………..38
Table 3-14: Register of outputs
………………………………………………………………………………………………………….40
Table 3-15: Port (BA+Eh) through reading
……………………………………………………………………………………………..40
Table 3-16: Port (BA+Fh) through reading
……………………………………………………………………………………………..40
LIST OF FIGURES
Fig. 1-1: External view of DIC324
……………………………………………………………………………………………………….13
Fig. 1-2: Overall dimensions and location of main components of DIC324
………………………………………………………...14
Fig. 2-1: Block diagram of DIC324
………………………………………………………………………………………………………15
Fig. 2-2: Location of the SA1 base address switch
……………………………………………………………………………………16
Fig. 2-3: Numbering of XS4 connector contacts
……………………………………………………………………………………….18
Fig. 2-4: Digital input connector
………………………………………………………………………………………………………….19
Fig. 2-5: Diagram of DIC324 input channel
…………………………………………………………………………………………….20
Fig. 2-6: Connection type jumpers
………………………………………………………………………………………………………20
Fig. 2-7: XP12 jumper
…………………………………………………………………………………………………………………….21
Fig. 2-
8: Digital output connector………………………………………………………………………………………………………..21
Fig. 2-
9: Diagram of the connector's ports' outputs……………………………………………………………………………………22
Fig. 2-10: Input channel 1 diagram
……………………………………………………………………………………………………...24
Fig. 2-
11: SA1 base address setting switch…………………………………………………………………………………………....24
Fig. 3-
1: SA1 base address setting switch…………………………………………………………………………………………......27
Fig. 3-
2: Connection to the module……………………………………………………………………………………………………..30
Fig. 3-
3: Matrix diagram…………………………………………………………………………………………………………………..35
Fig. 3-4: Integrated parts of the block-
diagram………………………………………………………………………………………...39
All information in this document is provided for reference only, with no warranty of its suitability for any specific purpose. This information has been thoroughly checked and is believed to be
entirely reliable and consistent with the product that it describes. However, Fastwel accepts no responsibility for inaccuracies, omissions or their consequences, as well as liability arising from
the use or application of any product or example described in this document.
Fastwel Co. Ltd. reserves the right to change, modify, and improve this document or the products described in it, at Fastwel's discretion without further notice. Software described in this
document is provided on an “as is” basis without warranty. Fastwel assumes no liability for consequential or incidental damages originated by the use of this software.
This document contains information, which is property of Fastwel Co. Ltd. It is not allowed to reproduce it or transmit by any means, to translate the document or to convert it to
any electronic form in full or in parts without antecedent written approval of Fastwel Co. Ltd. or one of its officially authorized agents.
Fastwel and Fastwel logo are trademarks owned by Fastwel Co. Ltd., Moscow, Russian Federation. Ethernet is a registered trademark of Xerox Corporation. IEEE is a
registered trademark of the Institute of Electrical and Electronics Engineers Inc. Intel is a trademark of Intel Corporation. Microsoft is a trademark of the Microsoft corporation. In
addition, this document may include names, company logos and trademarks, which are registered trademarks and, therefore, are property of their respective owners. Fastwel
welcomes suggestions, remarks and proposals regarding the form and the content of this Manual.
4
