CPC1001
C P C 1 0 0 1 U s e r M a n u a l
28
© 2 0 2 1 F a s t w e l V e r . 0 0 1
When i
nstalled on the carrier board, the CPC1001 module is fastened on the standoffs using 4 x
M2.5 screws through the
⌀
2.9 mm holes (see Fig. 2.2).
Fig. 2.2
– Mounting dimensions of CPC1001-01
2.6 Selection of OS boot source
One of the 8 possible sources of OS boot is selected by setting static levels at the inputs
BOOT_SEL [2 ... 0]# (pins P125 ... 123 of the SMARC connector) in accordance with table. 2.2.
