CPC1001
C P C 1 0 0 1 U s e r M a n u a l
25
© 2 0 2 1 F a s t w e l V e r . 0 0 1
The product contains components sensitive to static electricity. Observe the following
precautions to avoid damaging the module:
– You should remove the static charge from your clothes before touching the module. The best
way to do so is by touching any metal part of the system enclosure.
– Do not touch electronic components or connector pins.
– If possible, always work with the module in workplaces protected against static electricity.
2.3 Information on the types of hazardous effects
In terms of its design, the device is safe for human life and health when used in accordance with
this User Manual and contains no public health hazards (paragraph 1.2.12).
2.4 Heat removal
Reliable operation of the CPC1001 module requires a properly designed heat removal system, with
due consideration to the following factors:
- the heat removal of the module largely depends on the executable end-user and system software
and, therefore, must be estimated for each specific application (the reference information is given
in paragraph 1.2.10);
– the heat-dissipation plate of the CPC1001-01 module, without an additionally installed heatsink
(and fan), in general, would be insufficient for proper heat dissipation;
– Operating system,
depending on its settings, is capable of monitoring the readings of the
temperature sensor
2
built into the processor module during operation and can respond to
exceeding of configurable thresholds
3
as follows:
▪ respond by decreasing in the frequency of computing cores and processor's graphics controller if
the first threshold is exceeded (recommended value:
+85 °C);
▪ respond by an immediate shutdown if the second threshold is exceeded (recommended value:
+105 °C);
