Fastech Ezi-SPEED ESD-120-C, Manual

Page: 60 / 93

-60-
• Operating method
Operate the motor by selecting any of the operation data No.0 to No.7 based in a combination of
ON/OFF status of the P0, P1 and P2 inputs. The motor is operated using the rotation speed,
acceleration time, deceleration time and torque limit in the selected operation data number.
• Operation procedure (When the “external operation signal input” parameter is set
to “ON”)
1. Set the operation switch to “RUN” side
2. Select the operation data number suing the P0, P1 and P2 inputs
3. When the FWD or REV input is turned ON, the motor will rotate.
4. Switch the operation data number using the P0, P1, and P2 inputs
5. When the FWD or REV input switch has been turned ON or is turned OFF, the motor will
stop.
Operation data number P0 P1 P2 Rotation speed [rpm]
0 OFF OFF OFF 1000
1 ON OFF OFF 500
2 OFF ON OFF 2000
3 ON ON OFF 1500
4 OFF OFF ON 3000
5 ON OFF ON 2500
6 OFF ON ON 4000
7 ON ON ON 3500
* Setting speed value is example, can be changed to needed speed.
When changing from the present speed to the new speed, the acceleration time and deceleration
time set in the next operation data number are used.