Fastech Ezi-SPEED ESD-120-C, Manual

Page: 87 / 93

-87-
10.4 Regular inspection
It is recommended to periodically inspection the following items list after each operation of the
motor.
Attention
• When connected motor and drive, do not the insulation resistance test or
dielectric strength test. It may result in damage to the product.
•
The drive uses semiconductor elements, so be careful when handing them.
Electrostatic discharge can damage the drive.
• Inspection item
No Inspection item Action
1
Are any of the motor (gearhead) mounting
screws loose?
Tighten the screws.
2
Are there any abnormal noises in the
motor ball bearing or other parts?
.
Stop using the product immediately,
contact to the technical support
center.
3
Are there any abnormal noises in the ball
bearing or meshing parts of the gearhead?
4
Is the motor output shaft and load shaft
out of alignment?
5
Are there any scratches, problem or loose
drive connections in the cable?
6
Are there an abnormal odor or problem
inside the drive?
7
Are any of the mounting screws or main
power input unit of the drive loose?
Tighten the screws.
8
Are there any foreign substance in the
mechanical part of the drive?
Using the product after remove
the foreign substance.