38
6.
Be sure there is suffi
cient space to swing the booms into their fi eld position.
7.
Start the tractor and run at 1/3 throttle to provide oil for boom position cylinders (Refer to Section 4.6
for Controller Switch Functions).
8.
Raise booms up to lift them out of their cradles.
9.
Extend inner booms out until they are 90° to the frame. Watch for any interference.
10. Pivot outer booms out into their fully extended position.
11. Lower boom to its lowest position.
12. Reverse the above procedure when converting from fi eld to transport confi guration.
Extended
Fig. 56 EXTENDING BOOMS
Summary of Contents for 973P Series
