37
4.9 TRANSPORT/FIELD CONVER-
SION
The sprayer is designed to easily convert from
transport to fi eld or fi eld to transport.
When converting from transport to fi eld, follow this
procedure:
1.
Clear the area of bystanders, especially chil-
dren, before starting.
2.
Convert only in an area that is free of overhead
obstructions and power lines. Electrocution
can occur without direct contact.
Pin (Typical)
Fig. 54 TRANSPORT LOCK PINS
Fig. 55 BOOM CYLINDER VALVE
3.
Place all controls in neutral, stop engine, set
park brake and remove ignition key before
dismounting.
4.
Retract transport lock pins
from the cradles.
5.
Open the valve to the boom
lift cylinder that allows the
boom to lower.
DANGER
ELECTROCUTION HAZARD
KEEP AWAY FROM POWER LINES
1. Stay well away from power lines when fold-
ing or extending wings. Electrocution can
occur without direct contact.
2. Lower wings completely before moving or
transporting.
To prevent serious injury or death from elec-
trocution:
805
Summary of Contents for 973P Series
