OPERATING AND MAINTENANCE MANUAL
RASE.TOP.4028
Code DOC.
UM TOP AUTOMATIC
4.0
Rev. 6
Page 7 of 86
7
1 – GENERAL INFORMATION
1.1 – LAYOUT OF THE MANUAL
This manual is an integral part of the official documentation of the tyre changer machine,
(hereinafter referred to as the “machine”) It must be carefully stored and made available to
users and servicemen.
The user and serviceman must carefully read the information in this manual in order to properly
install and operate the machine.
FASEP (hereinafter referred to as the “Manufacturer”) will not be held responsible for any
damage caused during the operation of the machine due to the incorrect application of the safety
concepts in this manual.
1.1.1 – Purpose and intended recipients
The purpose of this manual is to provide the information required to operate and service the
machine.
Any work on the machine must be performed by a specially trained operator. Servicemen and
operating personnel must read and understand the instructions in this manual.
The employer
is responsible for training operators on risks due to injury and the regulations to
prevent them which are in force in the country where the machine has been installed.
In the event of any doubts concerning the proper interpretation of these instructions, please
contact the Manufacturer for any explanations necessary.
This manual is intended for the operator and the technicians appointed with servicing the
machine.
1.1.2 - Storing
The User Manual must be stored close to the machine in a specific container and protected from
liquids and anything else which may make it illegible.
