OPERATING AND MAINTENANCE MANUAL
RASE.TOP.4028
Code DOC.
UM TOP AUTOMATIC
4.0
Rev. 6
Page 37 of 86
37
4.4 – PRELIMINARY OPERATIONS AT THE FIRST STARTUP
The customer is obligated to perform inspections to identify any non-conformities prior to
installation.
Prior to commissioning:
Check rating plate data of the electrical components and the corresponding supply
available.
Check for the presence of all ID plates (ref. par. 2.2) and danger signs (ref. par. 3.5).
Check for the presence of the safety devices: emergency button (ref. par. 3.4).
When the machine is operating:
At each startup: ensure the direction of operation of the control valves corresponds with
the indication shown.
It is prohibited to come into contact with moving components (self-centring system both
when translating and tilted, bead-breaker unit) during machine operation.
Also:
Ensure the tyre changer was not damaged during the assembly or installation step.
Carefully check the integrity of electric panels, control panels, electric cables.
Ensure all external energy sources are properly connected.
In any case, if equipment does not seem suitable for proper and safe operation,
place it OUT OF ORDER until it is repaired or the damaged components have
been replaced.
4.5 – LONG PERIODS OF INACTIVITY
In the event of long periods of inactivity, do the following:
Disconnect power sources;
Prepare a clean storing area protected from the weather;
Ambient conditions: temperature range -5 °C – +40 °C;
Grease unpainted components;
Protect the machine against knocks and stresses;
Protect the machine and the electric equipment from humidity and significant variations in
temperature;
Ensure the machine does not come into contact with corrosive substances.
