OPERATING AND MAINTENANCE MANUAL
RASE.TOP.4028
Code DOC.
UM TOP AUTOMATIC
4.0
Rev. 6
Page 36 of 86
36
4.3 – POSITIONING
When FASEP has not been appointed with installation, the user is responsible for the proper
installation of the machine and must ensure that it complies with the relevant local provisions in
force and the rules of the trade indicated by FASEP Unless indicated otherwise, the floor must
support a specific load of 2 kg/cm
2
and be of the industrial type, smooth and flat.
Ensure the floor is flat and can support the weight of the machine before positioning the load.
The weight of the machine is distributed on four adjustable legs (Fig. 21).
Figure 21 – Adjustable leg
It is important for the tyre changer to be properly levelled to prevent
vibrations during operation.
