Fascut 19547, Instruction Manual

Page: 5 / 39

Here are some examples of different setups using different bending die diameters, different
material diameters, and different bending posts. Notice that the larger the material being bent, the
larger and heavier the set-up has to be. Attempting to bend material to tightly will cause the
material and/or bender components to break.
WARNING If not set-up properly, bender components or material will break and fly
out. SERIOUS INJURY OR DEATH COULD RESULT.
It is the operator’s
responsibility to calculate the tensile strength of the material being bent and
determine whether the chosen set-up can withstand the pressure without breaking.