Deep Freeze Enterprise User Guide
28
|
Using Deep Freeze Configuration Administrator
ThawSpace
ThawSpace is a virtual partition that can be used to store programs, save files, or make permanent
changes. All files stored in the ThawSpace are retained after a restart, even if the computer is
Frozen.
To create a single ThawSpace or multiple ThawSpaces using the Configuration Administrator,
complete the following steps:
1. Select the
Drive Letter
. The default letter is
T:
. However, it can be changed to any available
letter. The next available letter is automatically used if the selected drive letter already exists
on a computer when Deep Freeze is installed.
— When a
Drive Letter
is selected from the drop-down and used to create a ThawSpace, it is
removed from the drop-down.
— When a ThawSpace is removed, the corresponding
Drive Letter
is added back to the
drop-down.
— The
Drive Letter
cannot be same as the
Host Drive
.
2. Enter the
Size
. This is the size of the ThawSpace. The maximum size is 1024 GB and the
minimum size is 16MB.
— If the computer does not have enough free space to accommodate the selected ThawSpace
size, the size of the ThawSpace is adjusted downward to ensure proper operation of the
computer.
— If you select the Size less than 16MB, the ThawSpace is set to 16MB.
— If you select the Size more than 1024GB (1TB), the ThawSpace is set to 1024GB (1TB).
Summary of Contents for DEEP FREEZE ENTERPRISE
