Faro Focus 3D X 130, Training Manual

Page: 315 / 340

299
LMMMMM 2M RMLMMMMLMML M MMMMMM MMMM
Focus
3D
X 130 and X 330 • SCENE 5.3
September 2014
LMMMMM 2M
Registering a Detail Scan
This lesson explains the steps involved in registering a detail scan
with two full scans, one of which is the associated overview scan.
Understanding and practicing these steps can save time and ensure that
the project is executed efficiently and meets project requirements.
Learning objectives:
• Fix (lock) the detail scan.
• Register the two full scans automatically.
• Unfix (unlock) the detail scan.
• Register the detail scan with the overview scan.
• Complete the workflow for registration.
OvMLvMMw
When working with detail scans, it is best to complete the registration
process for all of the other scans before registering the detail scan. You
can do this by fixing (or locking) the detail scan, and then using either
automatic or manual registration. After registering the other scans, you
can release the detail scan and register it with the associated overview
scan.
You can fix the detail scan by opening the Properties dialog box and, on
the Scan tab, selecting Scan Fixed .
Before registering the detail scan, you must designate one of the full
scans as the reference scan. This is also done on the Scan Fixed tab of
the Properties dialog box.
When registering detail scans with the overview scan, it is easiest to
simply copy and paste the x , y , and z coordinates for both the Position
and Rot. Angle from the overview scan to the detail scan.