Faro Focus 3D X 130, Training Manual

Page: 186 / 340

170
MMMMMM MM MMMMMMMMMMMM MM MMMMM MMM
Focus
3D
X 130 and X 330 • SCENE 5.3
September 2014
AMMMvMMy MM1M
MMMMMMg MMMMM OpMMMML
In this activity, you will set some common SCENE OpMMMML .
Follow these steps:
1. Click LMMML > OpMMMML .
2. On the
MLvMgLMMMM
tab, select
MMvMMM MMMLM WLMMM
.
3. If you have used spheres, on the MLMMLMMg tab, click the
MLMML MpLMMM button, then set MLMML MpLMMM MMMMMMgL .
4. On the
FMMMMM
tab, under
PMMjMMM LMMLMMMML
, use the
browse button to enter the default project locations.
5. On the
GMMMMLM
tab, under
MLvM OpMMMML
, enable
SCENE to automatically save every 10 minutes.
6. On the UMMML tab, under DMLpMLy , set the units of
measure to m (
LMMgML
) and mm (
MmLMM MMzML
).