33
GROWSPAN
™
GOTHIC PRO GREENHOUSES AND SYSTEMS
Revision date: 06.07.18
Locate these parts to prepare the drop-down curtain for
installation and to attach it to the axle conduit:
• 106816 (1/2" pipe conduit)
• CC5505 (1/8" curtain cord)
• FA1960 (3/16" x 3" eye screw)
• AS5020 pulleys
• Duct tape
• Drop-down curtain
Attach Drop-Down Curtain Pulleys
Continue with the steps that follow:
1. Gather the pulleys and the same quantity of 3" eye
screws and move to the inside of the shelter.
2. Slide one pulley onto the threaded shaft of the eye
screw and twist the eye screw into the ribbon board
next to the first rafter to secure the pulley.
INSTALL THE DROP-DOWN CURTAIN (continued)
NOTE:
Position the eye screw and pulley a few
inches away from the rafter on either side of the rafter.
Pulley should hang freely from the eye screw.
Do not
overtighten the screw.
3. Move to the next rafter and repeat the steps to install
another pulley.
Install one pulley for each rafter along
each side of the frame.
4. Continue installing eye screws and pulleys into the
ribbon board
next to each rafter
until all pulleys are
installed
along both sides of the shelter
.
5. Install the curtain conduit and attach cords as
described in the next procedure.
Ribbon Board
As seen from
the inside.
Space below is reserved for customer notes.
