OLT 8x8 Cedar Assembly Manual Download | Manualshive

Page: 1 / 34

background image

8x8 Cedar

Greenhouse

Assembly Manual

Toll Free 1-888-658-1658 www.outdoorlivingtoday.com [email protected]

Page 1

Revision #6

April 25th, 2017

In the event of a missing or broken piece, simply call the Outdoor Living Today
Customer Support Line @ 1-888-658-1658 within 30 days of the delivery of your
purchase. It is our commitment to you to courier replacement parts, free of charge,
within 10 business days of this notification. Replacement parts will not be
provided free of charge after the 30 day grace period.

Thank you for purchasing
an 8x8 Cedar Greenhouse.
Please take the time to
identify all the parts prior
to assembly.

Safety Points and Other Considerations
Our products are built for use based on
proper installation and normal residential
use, on level ground. Please follow the
instruction manual when building your
Greenhouse and retain the manual for future
maintenance purposes.

Some of the safety and usage measures you may wish to consider include:

-snow load ratings vary by geographical location. If heavy or wet snowfall occurs, it is advisable to sweep the
snow off the roof(s).
-if the product is elevated, any structural and building code requirements are solely the customer's
responsibility, and should be abided by.
-in high or gusty wind conditions it is advisable to keep the structure securely grounded.
-have a regular maintenance plan to ensure screws, doors, windows and parts are tight.

Customer agrees to hold Outdoor Living Today Partnership and any Authorized Dealers free
of any liability for improper installation, maintenance and repair.

1
2
3
...
»

Summary of Contents for 8x8 Cedar



































Reviews:

No comments

Related manuals for 8x8 Cedar

Brand: ClearSpan Pages: 13

Brand: Halls Greenhouses Pages: 52

Canopia Base Kit

Brand: Palram Pages: 18

CANOPIA HARMONY 6x8 / 2x2.5

Brand: Palram Pages: 83

Brand: oGrow Pages: 25

Brand: Palram Pages: 6

Brand: Simplicity Pages: 28

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands