Cedar Bench
2
Revision date: 08.27.08
Thank you for purchasing the 4' x 8' Premium Cedar
Greenhouse Bench. This attractive and durable bench
is designed for general greenhouse use and is ideal for
potting plants, plant display, and plant maintenance.
This guide includes helpful hints and important information
needed to safely assemble and maintain the cedar bench.
Please read these instructions
before
you begin.
If you have any questions during the assembly, contact
customer service for assistance.
SAFETY PRECAUTIONS
Wear eye protection.
•
Wear head protection.
•
Wear gloves when handling the components.
•
Use a portable GFCI (Ground Fault Circuit Interrupter)
•
when working with electric power tools and cords.
Do not climb on the bench during or after assembly.
•
WARNING:
For safety reasons, those who are not
familiar with the use of basic hand tools and assembly
techniques are encouraged to
seek the help of a
qualified contractor
.
ASSEMBLY PROCEDURE
The steps below describe the basic bench assembly steps.
Verify that all parts are included in the shipment. Contact
customer service for questions or concerns.
Read these instructions and additional documentation (if
any) included with the shipment
before
you begin.
Gather the tools and assistants as needed to assemble
1.
the bench.
Assemble the bench on a smooth, level surface.
2.
Cover the area with cardboard or other material to
3.
protect the bench components during assembly.
Assemble the bench as described within this guide.
4.
Read the care and maintenance information.
5.
Complete and return all warranty information as
6.
instructed (if present).
REQUIRED TOOLS
The following list identifies the main tools required to
assemble the bench.
Additional tools may be needed.
Tape measure or measuring device
•
Variable speed drill or driver (cordless with
•
extra batteries works best)
Square-headed driver bit and Phillips®-head bit to drive
•
fasteners
Carpenter's square
•
Pencil or comparable marker
•
Hammers, gloves and eye protection
•
Assistants (optional but recommended)
•
Other basic hand tools as needed
•
UNPACK AND IDENTIFY PARTS
The following steps help to ensure that you have all the
necessary parts
before
you begin.
Unpack the contents of the shipment and place where
1.
you can easily inventory the parts. Refer to the Bill of
Materials/Spec Sheets and this guide.
Verify that all parts listed on the Bill of Materials/Spec
2.
Sheets or within this guide are present. If anything is
missing or you have questions, consult diagrams for
clarification or contact customer service.
NOTE:
At this time, you do not need to open the plastic
bags containing smaller parts such as fasteners and
clamps (if present).
CARE AND MAINTENANCE
Proper care and maintenance is important. Check the
following items periodically to properly and adequately
maintain your cedar greenhouse bench:
Regularly check the screws and braces to verify they
•
are tight and in good condition.
Do not climb or stand on the cedar bench at anytime.
•
Do not overload bench with excessive weight.
•
Replace all worn or damaged parts immediately.
•
Bench is not designed to withstand the weight and
•
forces resulting from the installation and use of clamps
or vices. Do not attach vices or clamp devices to
bench.
For replacement or missing parts, call 1-800-245-9881
•
for assistance.
