Cedar Bench
10
Revision date: 08.27.08
STEP THREE: ATTACH CORNER BRACES, FINAL LEG BRACES, POLY MAX TOP (continued)
With assistance, flip the assembled bench over onto its legs and attach the final two 96-1/2" cedar braces using
c.
the FAS13B #10 x 2-1/2" screws. Braces run along the top of the horizontal leg braces. Verify that the ends of
each brace are flush to the outside of each end horizontal leg brace and tight against the center leg as shown.
At the
center leg positions
, saddle the long braces
against the legs and secure using the 2-1/2" screws.
Do not overtighten.
See diagram below (left).
At the
end leg positions
, the long braces are set
toward the inside to remain square on the frame.
Secure using the 2-1/2" screws.
Do not overtighten.
See diagram below (right).
End Leg
Long Brace
Long Brace