Cedar Bench
12
Revision date: 08.27.08
Set the next panel in place. If needed, lift the panel at a slight angle to allow the flanges along the edge to
e.
interlock with the edge of the first panel. Loosen the screws
of the first panel
as needed to allow the panels to lock
together and tighten.
STEP THREE: ATTACH CORNER BRACES, FINAL LEG BRACES, POLY MAX TOP (continued)
Repeat the steps to install the remaining bench top panels.
f.
ATTENTION:
Loosen or remove the screws of the
installed panel and slide the next panel info position.
When installed correctly, the panels are locked
together. Secure all bench panels using the FAS11B
#6 x 1-5/8" screws.
Return to all screws and verify that all are tight. Continue by reading the care and maintenance information
g.
present at the beginning of this guide.