5
Cedar Bench
Revision date: 08.27.08
Required parts:
5 lengths of 1-1/2" x 2-1/2" x 45" cedar (10513645)
•
2 lengths of 1-1/2" x 2-1/2" x 96-1/2" cedar
•
(105136965AD)
4 lengths of 1-1/2" x 2-1/2" x 22-1/2" cedar
•
(1051362225)
STEP ONE: ASSEMBLE BENCH TOP FRAME
4 corner brackets (104636)
•
8 "T" brackets (104638)
•
3 rafter-to-ridge brackets (105085)
•
FAF25PB #8 x 3/4" screws
•
FAS13B #10 x 2-1/2" screws (20)
•
Complete these steps:
Position the five (5) 1-1/2" x 2-1/2" x 45" cedar supports between the two (2) 96-1/2" side boards of the bench top
a.
and secure using the 20 FAS13B screws. Assemble the frame on a flat, level surface.
Verify that the two (2) end boards are flush with the ends of the side boards and positioned between the side
boards. Center the three (3) inside 45" boards with the pre-drilled holes of the side boards and secure using the
screws.
To prevent stripping or splitting the wood, do not over-tighten the screws.
Install the four (4) corner brackets.
b.
Secure using the FAF25PB screws.
ATTENTION:
Before you secure each 45"
brace to the side boards, verify that 22-1/4"
(inside-to-inside) remains between each
supports.
Side Board
End Board
22-1/2"
inside-to-inside
45" Brace
45" Brace
Flush at each
corner.