Checking the nuts on the transport axle
• Use the plastic arrow “Check Point” to check for loose nuts. It promptly shows the condition of the nuts,
whether they are loose or not.
• Always check the Check Points before driving.
• When the arrows are not facing one another, the nuts have to be tightened to the required torque and
the Check Point arrows have to point against one another as shown in the green picture.
Torque for the axle nuts:
• M18x1,5 - 265 Nm
• M20x1,5 - 343 Nm
• M22x1,5 - 440 Nm
INITIAL POINT-TO-POINT
CONFIGURATION
DANGER-WHEEL NUTS HAVE LOOSENED!
32
|
50
Summary of Contents for SOFTER 9 PSW
