SETTING THE DOWN PRESSURE OF SIDE FRAMES
•
When the machine has been unfolded, the down pressure of
the side frames must be adjusted to ensure optimal terrain
tracing.
•
Set the value of 100 bar (1450 Psi) on the pressure gauge using
the circuit for unfolding.
•
Remove the drawbar securing and the belt prior to unfolding the machine into the work
position and place them to the pole.
•
Use the drawbar and the belt to secure the side frames from spontaneous unfolding after you
fold the machine into the transport position.
29
|
50
Summary of Contents for SOFTER 9 PSW
