6
│
25
Manual
KULTIS 6 | KULTIS 8
-
Learn about the machine, its functions and control elements prior to its first use. It might
be late for that once the work has started.
-
Keep all warning signs, plates and labels clean. If damaged, immediately replace them.
2.2.
Specific Labour Safety Requirements
-
Observe the instructions and symbols located on the machine. Their observation is
important for a safe and reliable operation.
-
When working on slopes, observe the recommended climbing ability according to the type
of the used tractor, speed and terrain surface.
-
The climbing ability of the machine depends on the climbing ability of the power producing
vehicle.
-
The machine may only be operated on slopes in the working position!
-
Before you leave the tractor, lower the machine down into the lowest position, turn off the
engine, secure the set against movement and against accidental activation.
-
When turning and reversing with the set, check the immediate surroundings. Always make
sure that you have a sufficient view.
-
No persons may access the area between the tractor and the machine unless the set has
been secured against movement by braking, or wedging.
-
The operator may only enter the footsteps of the machine when the machine has been
maximally lowered, the tractor engine has been stopped and the entire set has been
secured against movement.
-
Attention! It is not allowed to stay on the footsteps while the set is moving.
-
Only fill up the tank with liquid fertilizer when the tractor engine has been stopped and
secured against accidental activation. The set must be secured against movement.
2.3.
Connecting and Disconnecting the Machine
-
Connect and disconnect the machine on a flat and hard surface.
-
When mounting the machine to the lower bars of the three-point hitch, secure the control
handle in a position that excludes the possibility of accidental activation or lifting of the
machine.
-
There is a risk of injury in the area of the three-point hitch, therefore do not enter the area
between the tractor and the machine when connecting the machine.
-
After the machine has been connected, secure the lower bars against movement on the
sides, lift the supporting legs up and secure them with the pins.
2.4.
Hydraulic System
-
All hydraulically controlled parts of the machine represent a risk of injury.
-
When manipulating the hydraulic system of the tractor and the machine, the hydraulic
system of the machine must not be pressurized.
