5
│
25
Manual
KULTIS 6 | KULTIS 8
1.5.
Assembly and Detailed Production Design
The structural and technical quality of the product is at a corresponding level. The machine is
made from material that guarantees long-term service life and high operating reliability. The
individual components of the machine, parts and subdeliveries are 80% made in the Czech
Republic.
The unfolding of the machine from the transport to the working position is designed originally:
there are two straight-lined hydraulic cylinders fitted in the frame of the machine which protects
them from the aggressive effect of liquid fertilizers. The hydraulic cylinders are easily accessible
for maintenance or disassembly.
The parallel link hitches of the individual working sections are fitted with maintenance-free cases
with long service life, even in a dusty environment.
The dispensing of the liquid fertilizer is technically designed so that a constant batch
independent of the liquid surface level in the tank is provided. The valves and fittings have
constant pressure along the entire coverage of the machine in all application spots thanks to the
function of a specially designed distributor.
The design of the valves and fittings of the machine is very simple and fully functional with high
resistance in the aggressive environment of liquid fertilizers.
1.6.
Ecological Aspects
The technical design and technological use of the KULTIS row crop cultivator in the primary
production has a significant effect on the ecological view of the issue of applying liquid fertilizers.
The fertilizer is applied directly into the soil, in small batches, and therefore this method is
environmentally friendly when it comes to ecology.
The KULTIS
technology in its full scope meets the requirements of the “Nitrate Directive”.
2.
Safety Requirements
2.1.
General Labour Safety Requirements
Experience shows that injuries related to the operation of the machine, its service, maintenance
or transport are caused due to the failure to observe the basic principles of safe work. Therefore,
it is necessary to inform of labour safety requirements every person who is going to work with the
machine. All machines, including the
KULTIS 6
and
KULTIS 8 CULTIVATOR WITH
FERTILIZING
, may only be operated, repaired and serviced by a person that has been informed
in detail of the operation of the machine and any potential risks.
-
Observe the instructions for the use of the machine included in this Operating Manual as
well as generally valid regulations for labour safety, health protection, road safety and
environmental protection.
-
Basic rule: Prior to each single activation, check the machine for any issues related to
labour safety, labour hygiene, fire safety, road safety and environmental protection.
-
The machine may only be operated by a person above the age of 18 who is a holder of a
driving licence, group T, and who has been informed of the operating manual of the
machine and of generally valid regulations of labour safety, health protection, road safety
and environmental protection.
-
The machine is operated by one person.
-
The operator must not operate the tractor and the machine when under the influence of
drugs or narcotics having side effects leading to decreased concentration.
-
The operator is liable for safety and all damages caused by the machine operation.
Vážený uživateli, před manipulací se strojem se důkladně seznamte s tímto
návodem k obsluze a řiďte se pokyny v něm uvedenými.
