18
|
61
6 DESCRIPTION
FANTOM 650 PRO, FANTOM 800 PRO, FANTOM 850 PRO
is structurally designed as a semi-mounted
folding machine. The basic version consists of a drawbar and a working section. The chassis is aggregated
with the pulling vehicle using a height-adjustable loop for guide pin ø50mm (ø70mm or K80 hitch). The chas-
sis includes a supporting leg to support the machine after it is disconnected from the tractor.
The working section consists of a central frame with the transport axle and of two side frames. There
are five rows of working shares and tracing wheels on the central and side frames. Furthermore, there are
rollers in the rear part of the machine that compact the aerated soil. The machine is designed for work with
or without rollers. The roller hitches are equipped with a quick-coupling system for fast disassembly. It is
possible to install a front flexi-board in front of the first row of ploughshares on request to increase the lev-
elling effect during work. The axle is located inside the machine in front of the rear roller. The tracing wheels
are used for setting the working depth.
The machine must not be operated with lifted rear rollers for a long time, the rollers can be
quickly removed using the quick-coupling system, see Chapter 9.1 !!!
6.1 Working parts of the machine
1.
Tractive pole with a folding leg
2.
Tracing wheel
3.
Flexi-board / Coulters
4.
Five rows of shares
5.
Rear levelling discs
6.
Roller
7.
Transportation axle
Summary of Contents for FANTOM 650 PRO
Page 2: ...2 61 Prepared by Technical Department Farmet a s on 31 05 2017 changes reserved...
Page 4: ...PREFACE 4 61 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE...
Page 17: ...WORK SAFETY LABELS FANTOM 800 PRO FANTOM 850 PRO 17 61...
Page 31: ...COMMISSIONING Machine position for folding Machine position for unfolding 31 61...
