8.5 Description of the share/chisel replacement
•
If the ploughshare / chisel wear is high, this working tool must be replaced
•
Tools required for replacement:
• HAMMER
• DRIVER - 12 mm
•
The installation is the same for all types of working parts
The machine is sufficiently
lifted so that the working part
can be removed from the
shoe.
Using the prepared tools,
drive the spring pin out and
remove the ploughshare from
the shoe.
Drive a new working part in
the shoe and secure it with
the spring pin 12x50mm.
39
|
61
Summary of Contents for FANTOM 650 PRO
Page 2: ...2 61 Prepared by Technical Department Farmet a s on 31 05 2017 changes reserved...
Page 4: ...PREFACE 4 61 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE...
Page 17: ...WORK SAFETY LABELS FANTOM 800 PRO FANTOM 850 PRO 17 61...
Page 31: ...COMMISSIONING Machine position for folding Machine position for unfolding 31 61...
