9.2 Setting the parallelogram
The working position of the roller must be parallel to the ground surface. To adjust the position of the
roller, proceed as shown in the figure below.
1. Release the securing nut
2. Shortening/extending the nut
•
Shortening – the rear roller moves up
•
Extending – the rear roller moves down
43
|
61
Summary of Contents for FANTOM 650 PRO
Page 2: ...2 61 Prepared by Technical Department Farmet a s on 31 05 2017 changes reserved...
Page 4: ...PREFACE 4 61 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE...
Page 17: ...WORK SAFETY LABELS FANTOM 800 PRO FANTOM 850 PRO 17 61...
Page 31: ...COMMISSIONING Machine position for folding Machine position for unfolding 31 61...
