8.3.2 Machine folding procedure
Machine Folding Procedure – Transport Position
Initial position: The machine is unfolded and recessed, both ball valves outside are opened.
Conditions that must be observed prior to the commencement of folding:
• the rear section of rollers must be lifted in the maximum position
• the machine must be lifted up to zero position
1
Lift the machine on the axle, i.e. draw out the piston-rods of the axle using the yellow circuits into the
marginal position, i.e. maximum release.
Close the ball valve of the yellow circuit.
2
Fold the machine using the red circuit.
Close the ball valve of the red circuit.
The machine is ready for transport.
33
|
61
Summary of Contents for FANTOM 650 PRO
Page 2: ...2 61 Prepared by Technical Department Farmet a s on 31 05 2017 changes reserved...
Page 4: ...PREFACE 4 61 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE...
Page 17: ...WORK SAFETY LABELS FANTOM 800 PRO FANTOM 850 PRO 17 61...
Page 31: ...COMMISSIONING Machine position for folding Machine position for unfolding 31 61...
