20
|
41
8 COMMISSIONING
•
Before taking over the machine, test and check, whether damage occurred during transport
and whether all parts contained in the bill of delivery were supplied.
•
Before commissioning the machine, carefully read this operating manual, especially Chapters
1– 5. Before the first use of the machine, familiarise yourselves with its controls and overall
function.
•
During work with the machine, observe not only the instructions of this operating manual but
also generally valid regulations of work safety, health protection, fire and transport safety, and
environmental protection.
•
The operator must check the machine before every use (commissioning) from the standpoint
of completeness, work safety, work hygiene, fire safety, transport safety, and environmental
protection. A machine showing signs of damage must not be commissioned.
•
Aggregation of the machine with the tractor is to be performed on a flat and hardened
surface.
•
When working on slopes, observe the lowest slope grade of the set
TRACTOR - MACHINE
.
•
Before starting the tractor motor, check whether no person or animal is in the working space
of the set and push the warning sound signal.
•
The operator is responsible for the safety and all damage caused by the operation of the
tractor and the connected machine.
•
The operator is obliged to adhere to the technical and safety regulations of the machine
determined by the producer when working.
•
The operator is obliged to retract the working bodies of the machine from the ground when
turning at the headland.
•
The operator is obliged to observe the prescribed working depths and speeds stated in the
manual in Chap.1 when working with the machine.
•
The operator is obliged to lower the machine to the ground and secure the set against
movement before leaving the tractor cabin.
•
Lower the machine with caution so that the chisels and shares are not damaged by sharp
lowering to the ground. Position the machine on a flat ground so that the weight of the
machine is evenly transferred to all shares.
Summary of Contents for DIGGER 3 N
Page 2: ...2 41 Prepared by Technical Department Farmet a s on 12 10 2018 changes reserved ...
Page 4: ...PREFACE 4 41 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 6: ...PREFACE 6 41 ...
Page 15: ...WORK SAFETY LABELS Fig 1 Location of safety labels on the machine 15 41 ...
