10.3 Setting the leveling discs
•
Behind the second row of ploughshares, there are the directing discs which, if properly
adjusted, increase the quality of the output behind the machine - above all, they eliminate land
unevenness along the entire working width.
•
Levelling discs are not designed for cultivating compacted soil, but rather for directing the
processed soil and covering it with finer soil along the entire working width of the machine.
•
The working height of the levelling discs is adjusted by two handles as per Fig. 6.
•
Due to the fact that the disc beam is connected with the roller frame, when changing the
machine working depth, the working height of the discs is changed as well, which means that
the setting by means of handles is used for fine adjustment of the disc position.
Fig. 6 - setting of the disc height
•
With edge discs, it is possible to set three width positions for work as per Fig. 7 and thus
achieve optimal directing of the soil towards the rear roller in various soil conditions.
•
For transport, the edge discs must be folded as per chapter 9.
Fig. 7 - setting options for edge levelling discs for work
30
|
41
Summary of Contents for DIGGER 3 N
Page 2: ...2 41 Prepared by Technical Department Farmet a s on 12 10 2018 changes reserved ...
Page 4: ...PREFACE 4 41 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 6: ...PREFACE 6 41 ...
Page 15: ...WORK SAFETY LABELS Fig 1 Location of safety labels on the machine 15 41 ...
