16
|
41
6 DESCRIPTION
The
DIGGER 3 N, 4 N
machines are structurally designed as a mounted machines.
The chisel plough is fitted with a three-point suspension TPS 3 and 4. The machine consists of the main
frame which is fitted with two rows of shanks with ploughshares which are protected by automatic hydraulic
protection and a shear bolt against overload. Behind the rear row of ploughshares, there is the parallel push
linkage with which it is possible to adjust the height of the beam with packing discs and the rear roller.
6.1 Working parts of the machine
1.
Three-point suspension
2.
Supporting frame
3.
Setting of the position of the roller and discs
4.
Rear frame rollers
5.
TPS towing suspension
6.
Front share row
7.
Rear share row
8.
Packing discs
9.
Crumbling roller
Summary of Contents for DIGGER 3 N
Page 2: ...2 41 Prepared by Technical Department Farmet a s on 12 10 2018 changes reserved ...
Page 4: ...PREFACE 4 41 IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE ...
Page 6: ...PREFACE 6 41 ...
Page 15: ...WORK SAFETY LABELS Fig 1 Location of safety labels on the machine 15 41 ...
