![FarmaMed Wrist Blood Pressure Monitor Instructions For Use Manual Download Page 48](http://html.mh-extra.com/html/farmamed/wrist-blood-pressure-monitor/wrist-blood-pressure-monitor_instructions-for-use-manual_545241048.webp)
EN
48
E1: can’t normally Increase
pressure.
Check your wrist cuff if any
air leakage.
Contact Farmamed if you need to
replace wrist cuff with new one.
The systolic pressure Value
or diastolic Pressure value
too high.
The systolic pressure Value
or diastolic Pressure value
too low.
The wrist cuff was held lower
than your heart.
The wrist cuff was not
attached properly.
You moved your body or s
poke during measurement.
The wrist cuff was held higher
than your heart.
No rest position was observed
during measurement.
Keeping correct position and
gesture to measure again.
E3 inflate pressure too high.
Pressure value of more than
299mmHg.
Contact Farmamed if you need to
re-measurement or send back
dealer for re-calibrate pressure.
Battery icon on
Battery low power.
Replace battery and measure
again.
Problem
Possible cause
Solution
TROUBLE-SHOOTING
Please check the following points if you encounter any issues during the use of the device.