RESTRICTED USE ONLY
Fargo Electronics, Inc.
Persona M30 Card Printer User Guide (Rev. 1.0)
4-22
Resolving a No Ribbon Installed Error (continued)
Step Procedure
2
Verify that a Ribbon Cartridge is installed in the Printer.
a. Press
on
the
Resume
button.
b. If the issue persists, continue to Step 3.
3
Remove the Rear Cover and check that the Ribbon RFID cable is securely
connected to the Main Board (J-5) and the RFID Sensor.
•
If the connections are loose, reattach them.
•
Press
on
the
Resume
button.
•
If the connections are good or if the issue persists, continue to Step 4.
4
Replace the Ribbon RFID Sensor.
